Lumatek
-
AccessoriesT-Junction + Control Link Cable (LED)
Buy hereT-Junction & Control Link Cable ( LED ) This T-junction and control link cable component is used to link Lumatek Zeus LED fixtures together in series to be externally controlled with the Lumatek Control Panel Plus.The T-junction comprises three LLT M12 connectors, two male and one female.The male connector on the main stem connects to the dimming wire from the LED driver/fixture with the control link cable from the Control Panel Plus connecting to the male connector on the T arm.The control link cable male connector is connected to the female connector on the other T-arm and the control link cable female connector is connected to the next LED fixture T-junction and so on. T-Junction : LLT M12 male connector x 2 & LLT M12 female connector Control Link cable : H05RN-F 2×0.5mm with LLT M12 male connector & LLT M12 female connector
-
AccessoriesLUMATEK LED DRIVER 5m EXTENSION CABLES
Buy hereLumatek-LED 5m Extension Cables These two 5m long Extension Cables are designed to connect the Lumatek driver and LED fixture, in case the driver is used remote and away of the fixture.Allows a stable and precise connection without any interference these product is composed of 2 elements. 5m Extension Power Cable for LED driver: M19-2 Self-locking Male And Female Injection Moulding With 5m Extension Cable Wire Gauge: Ul Sjtw 2x16awg 300v 105°c Technical/test Data: Withstand Voltage Between Any Two Poles Is 500 Vac, 2ma, Test Time 3s, No Breakdown Or Leakage Current Occurs The Withstand Voltage Between Outer Cover And Electrode Is 500 Vac, 2ma, Test Time Is 3s, No Breakdown Or Leakage Current Occurs Insulation Resistance:100mω @ 100v Temperature Resistance: 105°c Working Temperature: -20°c-105°c Storage Temperature: -25°c-105°c Ip65 Comply Rohs
-
AccessoriesLUMATEK DAISY CHAIN 5M CONTROL CABLE
Buy hereLumatek Daisy Chain-5m Control Cable Simply connect the M12 Self-locking male plug into the Signal Out LED structure output and the M12 Self-locking female plug into the Signal In LED structure input of the next fixture. Technical/Test data: The Lumii Solar 315w Closed Reflector Helps The Light To Be More Focused Into One Specific Location. The Reflectors Are Easy To Install And Replace. Replacing Reflectors Every 6 Months Will Enable Growers To Get The Best Yields From Their Crops.
-
AccessoriesLUMATEK Control Panel PLUS 2.0 (HID+LED)
Buy hereLumatek Control Panel Plus 2.0 (HID+LED) Using innovative technology, this controller smartly monitors your grow room temperatures, light timing & intensity automation, safety-controlled dimming and switching On/Off. Simply connect it to your Lumatek Controllable Fixtures, Drivers or Ballasts and easily regulate your grow room environment. LUMATEK Digital panel PLUS 2.0 (HID+LED), a digital dual-signal controller, allows for precise control over your Lumatek ballasts, drivers, and lighting fixtures. This controller uses innovative technology to monitor your grow rooms, adjust light timing and intensity, dimming, on/off switching, as well as safety-controlled dimming. Connect it to any Lumatek Controllable Fixtures or Drivers, and you can easily control your grow space environment. Lumatek Digital Panel Plus 2.0 has a dual-signal twin channel digital lighting controller. Each of the two channels (Zones), can control up to 200 Lumatek controlled HID fixtures and ballasts using a digital RS485 or 50 analog 0-10V signals. Each Zone can be used to control multiple fixtures or up to 400 fixtures within a single room. Every Channel (Zone), can be controlled by the same-powered drivers/ballasts. Zone A can set Zone B to control LED lights 600w and Zone A to handle 315W and 600W HID ballasts. Power: Adaptor 100 – 240V AC 50/60Hz – DC 5V/2A Match HID Ballast: 315W, 600W, 630W, 1000W Match LED Driver: 90W, 465W, 600W, 1000W Power Dimming Range: 10% – 115% Power Regulation Accuracy: 1% Temperature-controlled Safety Dimming range: 0ºC-40ºC Temperature-controlled Safety Switching range: 10ºC-50ºC Sunrise and Sunset Duration: 0-30 min Dimensions: 125mm x 80mm x 25mm Control Panel For Up To 400 Hid Ballasts Or 100 Led Drivers Two Channels (Zone A & Zone B) Max Number Of Ballasts/drivers Per Zone: 200 (Rs485) Hid Or 50 (0-10v) Led Total Number Of Ballast/drivers Per Controller: 400 (Rs485) Hid Or 100 (0-10v) Led 24 Hr Light Timing & Switching Temperature Sensor Monitoring And Control Dimming Control (1% Increments) Safety And Temperature Control Automation Simulate Sunrise And Sunset To Lessen Plant Stress Light Intensity Automation Automate Timing And Dimming, As Well As Automate Switching. For Safety Control, Temperature-control Switching & Dimming Automate Light Intensity And Ppfd You can control up to 400 HID fixtures or ballasts (200 ballasts for each channel in Zone A and B).